Peeps

Q: What is the hole diameter of the  749-37PS, 749-37UL, 749-45PS and 749-45UL peep?
A: The hole is 3/16″ with no aperture installed in the peep.

Q: What apertures fit what peeps?
A: The  749-37PS, 749-37UL, 749-45PS, 749-45UL, and the 750PS Super Hunter Peep will accept all 1/8” clarifiers, 1/8” apertures, and the 1/8” verifiers.

The 749-37L, 749-37LH and the 753LH Super Hunter Peep will accept the ¼” verifiers and ¼” clarifiers. They will also accept all 1/8” clarifiers, 1/8” apertures, and the 1/8” verifiers with the use of the peep reducer (753-3).

Q: Which side of the peep should I look through?
A: Look through the side you screw the apertures into. On the hooded peeps this will be the side with the hood.

Q: What is the purpose of the hood on the hooded peeps?
A: The hood reduces glare on Verifiers and Clarifiers when in bright sunlight or fluorescent light and helps shield the lens from dust and moisture.

Q: How do I know what string angle the Specialty Archery Peep is?
A: There will be one dimple on the peep if it is a 37 degree peep and 2 dimples on the peep if it is a 45 degree peep. NOTE: the ¼” large (749-37L) and ¼” large hooded (749-37LH) peeps are available with a 37 degree string angle only.  The ¼” peeps are not available with a 45 degree string angle.

Miscellaneous
1/4″ peeps: 753LH, 749-37LH, 749-37L,  1.7998, 1.7999, 1.8000, 1.8001, 1.8003, 2.7998, 2.7999, 2.8000, 2.8001, 2.8003

1/8″ peeps: 750PS, 749-37PS, 749-37UL, 749-45PS, 749-45UL
Apertures: 1/8” verifiers, and clarifiers fit into 1/4″ housings with use of the 753-3 Peep Reducer/ Reducer

¼” verifiers and clarifiers fit directly into the ¼” peeps.

1/4″ peeps: 753LH, 749-37L, 749-37LH,  1.7999, 1.8000, 1.8001, 1.8003, 1.7998, 2.7999, 2.8000, 2.8001, 2.8002

1/8″ peeps: 750PS, 749-37H, 749-37PS, 749-37UL, 749-45PS, 749-45UL

Apertures, 1/8″ verifiers, and clarifiers fit into 1/4″ housings with use of the 753-3 Peep Reducer/ Reducer

Q: How to tie in a peep?

A: See the various charts below.